ADUM1201ARZ-RL7 SOIC-8 Dual Channel Digital Isolator New and Original ADUM1201 Dual Channel Digital Isolator Chip

ADUM1201ARZ-RL7 will patch SOP-8 two-channel digital isolator IC chip

Dual-Channel Digital Isolators

ADUM1200CR ADUM1201BR ADUM1200CR-RL7 ADUM1200UR-EP ADUM1200UR-EP-RL7 ADUM1201ARZ

ADUM1200BRZ ADUM1200BR ADUM1200BRZ-RL7 ADUM1200AR ADUM1201BRZ-RL7 ADUM1200CRZ-RL7

ADUM1200BR-RL7 ADUM1201CRZ ADUM1200ARZ-RL7 ADUM1201BR-RL7 ADUM1201CRZ-RL7 ADUM1200CRZ

ADUM1200ARZ ADUM1201ARZ-RL7 ADUM1201BRZ ADUM1201CR ADUM1201AR-RL7 ADUM1201AR

ADUM1201WURZ-RL7 ADUM1201WURZ ADUM1200WSRZ ADUM1201WTRZ-RL7 ADUM1201WSRZ

ADUM1200WTRZ-RL7 ADUM1201WSRZ-RL7 ADUM1200WURZ-RL7 ADUM1201WTRZ ADUM1200WSRZ-RL7

ADUM1200WURZ ADUM1200WTRZ

ADuM1200/ADuM1201

The ADuM1200/ADuM1201 isolators provide two independent
isolation channels in a variety of channel configurations and
data rates (see the Ordering Guide). Both devices operate with
the supply voltage on either side ranging from 2.7 V to 5.5 V,

providing compatibility with lower voltage systems as well as

enabling a voltage translation functionality across the isolation

barrier. In addition, the ADuM1200/ADuM1201 provide low
pulse width distortion (<3 ns for CR grade) and tight channel-

to-channel matching (<3 ns for CR grade). Unlike other

optocoupler alternatives, the ADuM1200/ADuM1201 isolators
have a patented refresh feature that ensures dc correctness in

the absence of input logic transitions and during power-

up/power-down conditions.

The ADuM1200W and ADuM1201W are automotive grade
versions qualified for 125°C operation. See the Automotive
Products section for more information.

GENERAL DESCRIPTION

The ADuM1200/ADuM12011 are dual-channel digital isolators
based on the Analog Devices, Inc., iCoupler® technology.
Combining high speed CMOS and monolithic transformer
technologies, these isolation components provide outstanding

performance characteristics superior to alternatives, such as
optocouplers.

By avoiding the use of LEDs and photodiodes, iCoupler devices
remove the design difficulties commonly associated with opto-
couplers.

APPLICATIONS INFORMATION PCB LAYOUT

The ADuM1200/ADuM1201 digital isolators require no external
interface circuitry for the logic interfaces. Power supply bypassing
is strongly recommended at the input and output supply pins.
The capacitor value must be between 0.01 μF and 0.1 μF.
The total lead length between both ends of the capacitor and
the input power supply pin must not exceed 20 mm.
See the AN-1109 Application Note for board layout guidelines.
PROPAGATION DELAY-RELATED PARAMETERS
Propagation delay is a parameter that describes the time it takes
a logic signal to propagate through a component. The propagation
delay to a logic low output can differ from the propagation delay

to a logic high output.

Specifications

LU'S TECHNOLOGY CO., Ltd.

(LU’S) was established in 2014. One of the largest electronic components distributors in Hongkong and Shenzhen, China.

LU’S provides a full range of services for long-term orders, providing design-chain service, with a complete electronic

components supply and distribute system. Component categories include active components (IC integrated circuits, memory

chips, diodes, transistors, etc.) and passive components (capacitors, resistors, inductors, etc.) and electromechanical

components (connectors, switching devices, etc.).

Quickly feedback and satisfy customers’ need.

Let’s make development easier.

LU'S TECHNOLOGY CO., Ltd. (LU’S) was established in 2014. One of the largest electronic components distributors in Hongkong and Shenzhen, China.

LU’S provides a full range of services for long-term orders, providing design-chain service, with a complete electronic components supply and distribute system.

Component categories include active components (IC integrated circuits, memory chips, diodes, transistors, etc.) and passive components (capacitors, resistors, inductors, etc.) and electromechanical components (connectors, switching devices, etc.).

Quickly feedback and satisfy customers’ need.

Let’s make development easier.